Clear Gloss PPF
The standard choice for owners who want protection without any visual change. It deepens the existing shine slightly and works equally well on solid, metallic and pearl colours.
Our car paint protection film in Dubai shields the factory finish from chips, sand and sun. We prepare every panel, then fit a self-healing layer that stays almost invisible on the car.
5-star on Google · 87 reviews
The facts
Factory clearcoat on most modern cars is only about 1.5 to 2 mil thick, and 2 mil is about the minimum needed to keep UV away from the colour layer underneath. A premium polyurethane layer adds around 8 mil of protection on top, roughly four times the clearcoat depth. Gravel on motorways, blowing sand and roadworks chip unprotected bodywork within months.
Film makers rate typical life at 5 to 10 years, depending on quality, installation and climate. Strong sun and summer heat age cheaper grades faster, so material choice matters more here than in mild countries. We recommend a grade based on how far you drive, where you park and how long you plan to keep the car.

We offer 6 PPF options, and each film comes in partial front, full front or full body coverage. We help you choose the best film for your finish, budget and daily driving.
The standard choice for owners who want protection without any visual change. It deepens the existing shine slightly and works equally well on solid, metallic and pearl colours.
A matte layer turns a gloss finish into a satin look while protecting it. It also suits factory matte paint, which cannot be polished when it gets scratched.
Tinted PPF changes the car's shade, from satin greys to bold reds, while keeping the original coat protected. It peels off whenever you want the factory colour back.
Carbon fibre and brushed metal textures add a custom look to bonnets, roofs or mirror caps. The layer still absorbs stone chips just like standard clear PPF does.
A thin ceramic layer on top of the PPF adds water beading and easier washing. It also helps the surface resist staining from bird droppings and insect remains.
Pre-designed digital templates match the shape of each panel on your make and model. A plotter cuts them, so no blade touches your paint during the fitting stage.
Our PPF protects your car in 8 practical ways, from daily motorway driving to the day you sell it.
The elastic layer absorbs the energy of gravel, sand and debris kicked up on busy highways. Impacts that would crack bare clearcoat leave the finish below completely untouched.
Fine swirls from washing or a brushed bag fade away when sunlight or warm water heats the surface. Your car keeps a smooth finish without repeated polishing sessions.
Ultraviolet rays break down pigment, especially on red, black and dark blue paint. The film filters this radiation, so colours stay rich after many years of outdoor parking.
Bird droppings, tree sap and insect splatter contain acids that etch clearcoat within days in hot weather. The topcoat takes that attack instead, and marks wipe off cleanly.
Hydrophobic topcoats make water bead up and roll off, carrying dust with it. Sandstorms leave less residue behind, so routine weekly washes take noticeably less time and effort.
Clear gloss film sits flush against the paint with tucked edges, so most people never notice it. Original colour, metallic flake and factory shine stay fully visible underneath.
A quality TPU layer keeps protecting for years before it needs replacing. One installation often covers an ownership period, which removes the cost of repeated touch-ups and resprays.
Buyers and dealers pay more for original, chip-free bodywork with matching depth readings. Peeling the film off before a sale reveals factory paint that still looks almost new.
Each option protects in a different way. The table shows which one suits your goal.
| Option | What It Does | Typical Thickness | Best For |
|---|---|---|---|
| Paint protection film | Absorbs chips and scratches, self-heals light marks | Around 6 to 10 mil | Stone chips, sand and long-term ownership |
| Ceramic coating | Adds gloss and repels water and dirt | A few microns | Easy washing and shine |
| Vinyl wrap | Changes colour with limited impact resistance | Around 3 to 4 mil | Style changes on a budget |
| PPF plus ceramic | PPF absorbs impacts, coating keeps it clean | Combined layers | Maximum protection with easy care |
Step by step
We check clearcoat depth and existing defects with a digital gauge and bright lighting, then agree the coverage and grade with you.
A full wash, clay treatment and iron remover strip away bonded dirt, so nothing gets trapped beneath the new layer later on.
Machine polishing removes swirl marks and light haze first, because a clear covering magnifies any small flaw left underneath it for years.
Each piece is cut to your exact model using digital patterns, with extra material left for wrapped edges wherever the shape allows.
Each panel gets a slip solution, then the protective sheet is carefully positioned, squeegeed and heat-shaped around every curve without stretch marks.
The car stays indoors while the adhesive settles, then every edge and corner gets checked under bright inspection lights before the handover.
Wait Before Washing: Give the adhesive about a week to settle before the first wash.
Use pH-Neutral Shampoo: Harsh cleaners can dull the topcoat over time.
Avoid Pressure Washers Near Edges: A strong jet aimed at film edges can lift them.
Remove Bird Droppings Quickly: Acidic deposits stain film faster in summer heat.
Skip Automatic Brush Washes: Spinning brushes trap grit that scratches the surface.
Book a Yearly Check: A quick inspection catches lifting edges before dirt gets underneath.
Why 800 Exotic
Our installers work on plotter-cut patterns and wrapped edges daily, and they handle each stage themselves, from surface correction to the final edge inspection.
Complex bumpers, vents and parking sensors on supercars demand patience and precise cutting, and our installers handle them confidently every week in Al Quoz.
Every car gets a coating depth reading and defect report before film goes on, so you know exactly what condition the surface was in.
We recommend the coverage your driving actually needs, whether that means partial front for a commuter or full body for a valuable collector car.
Existing chips get touched up or resprayed in our own body shop before film installation starts, so no visible damage ever gets sealed underneath.
Since the workshop opened 15+ years ago, 50,000+ vehicles have rolled through it, and PPF customers add to our 87 Google reviews, all of them 5 stars.
Dubai · Abu Dhabi · Sharjah
Installations take place in Dubai at our Al Quoz location, while Abu Dhabi customers use the Musaffah branch and Sharjah drivers visit Industrial Area 10. Free collection brings the car straight to our indoor bay, where it stays until the adhesive fully settles.
Find our Al Quoz workshop on Google Maps
DubaiAl Quoz
Abu DhabiMusaffah
SharjahIndustrial Area 10Paint damage is far cheaper to prevent than to repair. 800 Exotic prepares, corrects and protects your paint with self-healing film fitted by trained installers. Message us with your model, and our team suggests the right coverage. Mechanical or bodywork jobs covered by car repair in Dubai fit into the same booking, and the car returns once everything is finished.
Answers
Cost depends on coverage area, product grade, vehicle size and how much correction is needed first. Our team confirms the final figure after inspecting the car in person.
Partial front work is usually finished in a day, while full body coverage needs four to six working days, including correction, fitting and curing time.
Yes. Quality film peels off with gentle heat and leaves factory paint intact underneath. Resprayed panels need extra care, because weaker refinish layers can lift with the adhesive.
PPF is thicker and self-heals, so it protects far better against chips. A car wrapping service suits owners who mainly want a colour change on a tighter budget.
Yes, on every panel it covers, because the layer blocks the UV that fades colour. Seats and dashboards fade through the glass instead, which car tinting helps prevent.
A coating over the film makes washing easier and keeps the surface glossy. Our car detailing team applies it after the film has cured.
5-star rated on Google
Every one of our 87 Google reviews is 5 stars. Read what owners say about their repairs, then see the full list on our Google profile.
Offering a full range of services, state-of-the-art equipment, and years of experience, we promise the finest care for your vehicle.