800 Exotic logo
Technician inspecting a worn turbocharger with a torch next to a new turbocharger on a workbench

Luxury and performance vehicles

Turbo Losing Power or Smoking? Get Expert Repair

Full diagnostics, precision rebuilds, and turbo replacements across Dubai, Abu Dhabi and Sharjah.

PrecisionRebuilds and
replacements
MOIAT-certified technicians
50
Hydraulic lifts
20+
Parts
OEM-spec
Written warranty
12-Month

5-Star Google Rating

5.0

(87 Reviews)

50,000+ Vehicles Serviced Across Dubai, Abu Dhabi and Sharjah

  • Trained

    On turbo systems

    For most major luxury and performance brands

  • 30,000+

    Sq. ft. facility

    With OEM-level boost diagnostic equipment

  • Fixed

    Price

    Confirmed after diagnosis, before any work begins

  • Free

    Pick-up and drop-off

    Across Dubai, Abu Dhabi and Sharjah

Is Your Turbo Failing? Check These Warning Signs

Symptom

What It Usually Points To

Noticeable drop in acceleration and power

  • Worn turbo bearings
  • Damaged compressor blades
  • Boost leak

Any of these signs means the turbo needs professional inspection before the damage spreads to the engine.

Send Us Your Boost Codes or Symptoms

  1. 1

    WhatsApp us

    with your car make, model, year, and mileage

  2. 2

    Share

    the symptoms, dashboard codes, or a short video of the issue

  3. 3

    Receive

    a preliminary diagnosis and workshop appointment

Complete Turbocharger Repair and Replacement Services

  • 01

    Turbo Bearing Replacement

    Worn journal or thrust bearings causing shaft play and metallic whine are replaced with OEM-spec bearings after the center housing is stripped and inspected.

  • 02

    Compressor Wheel Repair

    Chipped, cracked, or eroded compressor blades from debris ingestion are assessed and the wheel is replaced with a balanced OEM unit to restore full airflow.

  • 03

    Turbine Wheel Replacement

    Heat-damaged or cracked turbine wheels that reduce exhaust-driven spin are swapped with factory-matched replacements rated for sustained temperatures above 1,000°C.

  • 04

    Wastegate Actuator Repair

    A stuck, seized, or miscalibrated wastegate actuator causing overboost or underboost is rebuilt, recalibrated, or replaced to restore proper boost pressure control.

  • 05

    Boost Control Solenoid

    Faulty solenoid valves that fail to modulate boost pressure correctly are tested with OEM scan tools and replaced to eliminate erratic power delivery and fault codes.

  • 06

    Turbo Shaft Seal Replacement

    Worn compressor-side or turbine-side oil seals allowing oil to enter the intake or exhaust are replaced after the turbo cartridge is fully disassembled and cleaned.

  • 07

    Turbo Oil Line Service

    Blocked, cracked, or restricted oil feed and drain lines starving the turbo of lubrication are flushed or replaced with heat-resistant OEM hoses and fittings.

  • 08

    Intercooler Repair

    Damaged, leaking, or internally clogged intercoolers that reduce charge air density and boost efficiency are pressure-tested, repaired, or replaced with an OEM-matched unit.

  • 09

    Boost Pipe and Hose Repair

    Split, loose, or deteriorated silicone boost hoses and metal charge pipes causing boost leaks are traced with a smoke test and replaced to seal the system.

  • 10

    Full Turbo Rebuild (CHRA)

    The complete center housing rotating assembly is stripped, cleaned, inspected, and rebuilt with new bearings, seals, thrust collars, and a balanced shaft assembly.

  • 11

    Complete Turbo Replacement

    When internal damage is beyond rebuild, the entire turbocharger unit is replaced with a new or remanufactured turbo, installed, and calibrated to factory spec.

  • 12

    Variable Geometry Service

    Carbon-clogged or seized VGT vanes on variable geometry turbochargers are cleaned, freed, and recalibrated to restore smooth boost response across the entire rev range.

Turbo issue not listed? Tell us what is happening and we will run a full boost system diagnostic.

Talk to Our Turbo Team →

Turbo Rebuild vs Full Turbo Replacement

Rebuild

Full Replacement

Best for
Bearing wear, seal leaks, minor blade damage
Cracked housings, severe shaft damage, catastrophic failure
Turnaround
1 to 3 days depending on parts availability
Same-day if a suitable unit is in stock
Cost
Usually the more affordable option
Higher upfront cost
Longevity
Restored to OEM tolerances with new internals
Fresh unit with a full service life ahead

Our technicians assess every turbo on the bench before recommending rebuild or replacement. No assumptions, no unnecessary part swaps.

Technician fitting a turbocharger into a car's engine bay with tools laid out on the fender covers

How We Diagnose and Repair Your Turbocharger

  1. 1

    Boost System Diagnostic

    OBD-II scan for boost-related fault codes, live data monitoring of actual vs. target boost pressure, and visual inspection of all turbo components under lift.

  2. 2

    Turbo Removal and Bench Inspection

    The turbocharger is removed from the vehicle, fully disassembled on the workbench, and each component is measured against OEM wear tolerances with precision gauges.

  3. 3

    Rebuild or Replace

    Worn bearings, seals, and wheels are replaced with OEM-spec parts and the cartridge is dynamically balanced. If rebuild is not viable, a new or remanufactured turbo is sourced and fitted.

  4. 4

    Reinstall and Calibration

    The repaired or new turbo is installed with fresh oil lines, new gaskets, and correct torque specs. Boost pressure is verified through a controlled road test and final scan.

What Our Customers Say

Message Us to Get Started →
  • “Turbo on my 535i was whistling and throwing codes. They rebuilt the whole unit with new bearings and seals instead of selling me a brand new turbo. Runs like factory again and cost way less than the dealer quoted.”

    Saif K.BMW 535i

  • “Had zero boost on my Cayenne Turbo after a long highway drive. Turned out the wastegate actuator was seized. Fixed and recalibrated the same day. Other shop wanted to replace the entire turbo.”

    Mariam L.Porsche Cayenne Turbo

  • “Blue smoke on my AMG was getting worse for months. They pulled the turbo, found both shaft seals gone, and rebuilt it with OEM parts. No more smoke, full power back.”

    Faisal D.Mercedes C63 AMG

Luxury and Performance Brands We Work On

Twin-turbo, twin-scroll, and variable geometry turbo systems are handled in-house by trained specialists.

  • Porsche logoPorsche
  • Lamborghini logoLamborghini
  • Ferrari logoFerrari
  • Bentley logoBentley
  • Rolls-Royce logoRolls-Royce
  • Mercedes-Benz logoMercedes-Benz
  • BMW logoBMW
  • Audi logoAudi
  • Aston Martin logoAston Martin
  • McLaren logoMcLaren
  • Maserati logoMaserati
  • Range Rover logoRange Rover
  • Land Rover logoLand Rover
  • Jaguar logoJaguar
  • Bugatti
  • Lexus logoLexus
  • Toyota
  • Nissan logoNissan
  • Volkswagen logoVolkswagen
  • Ford logoFord
  • Jeep logoJeep
  • GMC logoGMC
  • Mazda logoMazda
  • Chevrolet logoChevrolet

Workshop and Vehicle Collection

All turbocharger work is performed at our 30,000+ sq. ft. Al Quoz facility, where hydraulic lifts, OEM diagnostic equipment, and turbo balancing tools are available for every job. Free vehicle pick-up and drop-off is included across Dubai, Abu Dhabi and Sharjah.

Service Areas Across Dubai, Abu Dhabi and Sharjah

Dubai skyline icon

Dubai

  • Al Quoz
  • Business Bay
  • Downtown
  • Dubai Marina
  • DIFC
  • JBR
  • Emirates Hills
  • Arabian Ranches
  • Palm Jumeirah
  • Motor City
  • Deira
  • Bur Dubai
  • Sobha Hartland
Abu Dhabi skyline icon

Abu Dhabi

  • Mussafah
  • Yas Island
  • Saadiyat Island
  • Al Reem Island
  • Khalifa City
Sharjah skyline icon

Sharjah

  • Al Nahda
  • Al Khan
  • Industrial Areas
  • Al Majaz

Frequently Asked Questions

How do I know if my turbo is failing?

Loss of acceleration, unusual whistling or whining sounds, blue or black exhaust smoke, and boost-related fault codes on the dashboard are the most common indicators. A professional boost diagnostic confirms whether the turbo, wastegate, or supporting components are at fault.

Can a turbo be rebuilt instead of replaced?

Yes, in most cases. Bearing wear, seal failure, and minor blade damage are all repairable through a precision rebuild using OEM-spec internals. Cracked housings or warped shafts typically require full unit replacement.

How long does a turbo repair take?

A rebuild takes 1 to 3 days depending on parts sourcing. A full turbo replacement with an in-stock unit can be completed the same day. Wastegate or solenoid repairs are typically finished within a few hours.

What causes turbo failure in the UAE?

Extended high-RPM driving in extreme heat, oil starvation from clogged feed lines, skipped oil changes, and carbon buildup on variable geometry vanes are the leading causes. Stop-and-go traffic combined with summer temperatures can accelerate turbo wear.

Does insurance cover turbo replacement?

Mechanical turbo failure from normal wear is generally not covered. Turbo damage resulting from a collision or road impact may qualify under comprehensive policies. Our team verifies eligibility and handles the claim process when applicable.

Restore Full Boost Before the Damage Spreads

A failing turbo does not fix itself. Delayed repairs can lead to oil contamination, engine damage, and complete turbo failure. Book a professional diagnostic at our Al Quoz workshop with free pick-up and a written warranty on every repair.

Call NowWhatsApp